|
Description
|
HP DESKTOP MINI LOCKBOX V2
|
Features & Benefits
- Support ATX motherboard up to 12" x 10.5"
- Available for rackmount and stand-alone installation
- Rotatable 5.25" cage to keep device in horizontal position (option)
- Dedicated 80mm fan for hard drive cooling
- Truly isolation anti-vibration design on internal hard drive and drive cage
- Dedicated 80mm fan for hard drive cooling
- Card retainer to hold low profile and full height add-on cards
- Front 120mm fan module with filter for add-on card cooling (option)
- 2nd 3 x 5.25" device cage to maximize flexibility (option)
- Support stand-alone installation via optional kit
- Support 1-door or 2-door front bezel configuraion
- Support PS/2 single or mini-redundant power supply unit
|
The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables. Four stunning tempered glass panels and three included CORSAIR SP RGB ELITE fans put your PC on display.
5000X RGB
MID-TOWER ATX CASE
FOR A CRYSTAL-CLEAR BUILD THAT KEEPS ITS COOL
The 5000X RGB makes a stunning, showpiece-worthy PC easy to build and easier to keep cool with the space and flexibility to mount multiple 360mm radiators, all surrounded by beautiful tempered glass on four sides.
Clear, Clean, and Cool
Four tempered glass panels show off your showpiece-worthy PC, while generous dust-filtered air channels provide minimal obstruction and ample airflow.
Maximum cooling potential
The 5000X RGB has incredible flexibility when it comes to cooling. With up to ten 120mm fan mounts, three included SP RGB ELITE fans with CORSAIR AirGuide technology and three seperate 360mm radiator locations, the only limit to your cooling options is your imagination.
There's no replacement for displacement
The 5000X RGB isn't your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion potential for liquid cooling.
Powerful directed Airflow
Equipped with three CORSAIR SP RGB ELITE 120mm fans featuring AirGuide technology with anti-vortex vanes to concentrate airflow and enhance cooling.
Take command of your cooling
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.
Extreme Cooling
Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.
Smart rgb lighting out-of-the-box
Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
Modern Front Panel I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
vertical gpu mount ready
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.
|
UNMATCHED POWER
Equip your battle station like no other with the MPG VELOX 100 Series. Inspired by speedy patterns and lively lighting effects, the MPG VELOX 100 Series is sure to help you dominate the battlefield with unmatched power.
OPTIMIZED AIRFLOW
The MPG VELOX 100 Series is optimized to provide generous and effective airflow for system cooling with vents built throughout the system. The MPG VELOX 100 Series comes with 4 fans and can mount up to 7.
VENTILATED FRONT PANEL
The MPG VELOX 100P AIRFLOW’s front panel is inspired by the liveliness of raves and festivals. It is well ventilated for the best cooling performance while featuring two stunning strips of ARGB lighting.
VERTICAL GPU MOUNT
The MPG VELOX 100 Series comes with a vertical GPU bracket as an accessory that allows you to mount your graphics card vertically.
SIDE AIR VENTS
The MPG VELOX 100 Series comes with a side air vent that can support up to 2 fans / 240mm radiator.
BIG VOLUME
The MPG VELOX 100 Series provides excellent components clearance, capable of having 1 x 360mm radiator/3 x 120mm fans on both the top and the front.
BETTER TOGETHER
Synergize the MPG VELOX 100 Series with a MSI motherboard by bridging a USB Gen2x2 Type-C port with 20 Gbps for convenient access. Establish a complete MSI gaming ecosystem with a graphics card, liquid cooler, and power supply.
ARGB SHOWROOM
Create your own ARGB battle station with the MPG VELOX 100 Series, fully supported by MSI Mystic Light.
INSTA-LIGHT LOOP BUTTON
Quickly control the MPG VELOX 100 Series’ lighting effects with the Insta-Light Loop at the touch of a button. Click through the profiles at ease and choose a favorite.
HINGED TEMPERED GLASS SWINGING WINDOW
The 3mm hinged tempered glass swinging window offers the best durability and system accessibility.
|
FOR AN IMMACULATE BUILD THAT KEEPS ITS COOL
The CORSAIR 5000D AIRFLOW is a mid-tower ATX case with easy cable management for a clean build, with room for a 360mm push pull radiator, a high-airflow front panel, and two included CORSAIR AirGuide fans for concentrated airflow.
CLEAN AND COOL
An optimized steel front panel delivers massive airflow to your system for maximum cooling.
MAXIMUM COOLING POTENTIAL
A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front or side and a 360mm push/pull in the roof.
THERE'S NO REPLACEMENT FOR DISPLACEMENT
The 5000D AIRFLOW isn’t your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion capability for liquid cooling.
POWERFUL DIRECTED AIRFLOW
Equipped with two CORSAIR AirGuide 120mm fans featuring anti-vortex vanes to concentrate airflow and enhance cooling.
TAKE COMMAND OF YOUR COOLING
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.
VERTICAL GPU MOUNT READY
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.
|
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
SHOP NOW
OVERVIEW SPECS GALLERY DOWNLOAD
Performance 1 FT
E-ATX HIGHLY COMPATIBLE PC CASE
SYSTEM STATUS WITH A GLANCE
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
Download
I/O Panel
Including the mainstream Type-C(10Gbps) port for high-speed transfer
Included dust plugs for dust prevention.
Mic/Audio 2-in-1 port.
PC SHOWCASE
4mm Tempered Glass Side Panel
Both side panels adopt tempered glass for better PC showcase visual effects.
EVERYTHING ORGANIZED
Cable Management on Point
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
1
Three sets of velcro straps for fan & I/O cable routing.
2
Five velcro straps for hardware and power supply cables.
3
Two velcro straps at the rear for rear I/O cable routing.
Easy Installation
Removable Top Cooling Bracket.
PRE-INSTALLED 4 FANS OF 30MM THICKNESS
Storm T3 PWM Fan
3 x Storm T3 140mm PWM Fans at the Front.
1 x Storm T3 120mm PWM Fan at the Rear.
COOLING COMPATIBILITY
Storm T3 PWM Fan
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
BEST DUST PREVENTION DESIGN
Exquisite Steel Mesh
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling
Modular Drive Trays
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
|
|
Short Description
|
Desktop Mini LockBox V2
|
Compact Industrial Server Chassis, 4U 17.5", CEB (12"x10.5"), 6 x External 5.25", 2 x External 3.5", 4 x Internal 3.5", 1 x Slim ODD, SGCC/ABS-HB
|
Mid-Tower, 2 x 3.5", 4 x 2.5", 2 x USB 3.0, USB 3.1 Type-C, White
|
MSI MPG VELOX 100P AIRFLOW Mid Tower Gaming Computer Case 'Black, 3x 120mm Fan + 1x 120mm ARGB Fan, ARGB light strip, USB Type-C, 1x Tempered Glass, MSI Center, E-ATX, ATX, mATX, mini-ITX'
|
Tempered Glass Mid-Tower, ATX, USB 3.0, White
|
Full Tower, ATX, USB 3.0 x 2, USB 3.0 Type-C, 522 x 230 x 522 mm, 12.55 Kgs
|
+61 490 518 664
