Cisco 1570 nm CWDM 2/4/8 Gb/s network transceiver module Fiber optic 8000 Mbit/s SFP+

MA-QSFP-40G-LR4

MA-SFP-10GB-ER

DS-CWDM8G1610=

QSFP-40G-LR4-S

QSFP-40G-LR4

Compatible with Cisco Meraki MS 355 Series/MS 425 Series

Hot-swappable transceiver that provides fast data transfer.

Enable enterprise clouds. Transform large storage networks. Lower operating costs. Deploy Fibre Channel, IBM Fibre Connectivity (FICON), and Fibre Channel over Ethernet (FCoE) on a single fabric. With theCisco MDS 9710 Multilayer Director (Figure 1), you’ll meet the stringent requirements of large virtualized storage environments. As a director-class SAN switch, the Cisco MDS 9710 uses the same operating system and management interface as other Cisco data center switches. It brings intelligent capabilities to a high-performance, protocol-independent switch fabric. You’ll gain uncompromising availability, security, scalability, simplified management, and the capability to flexibly integrate new technologies.

The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The QSFP-40G-LR4-S module supports 40GBase Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device.

The Cisco® 40GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 40 Gigabit Ethernet connectivity options for data center, high-performance computing 00networks, enterprise core and distribution layers, and service provider applications.

Features and Benefits of Cisco QSFP Modules
- Hot-swappable input/output device that plugs into a 40 Gigabit Ethernet Cisco QSFP port
- Interoperable with other IEEE-compliant 40GBASE interfaces where applicable
- Certified and tested on Cisco QSFP 40G ports for superior performance, quality, and reliability
- High-speed electrical interface compliant to the IEEE 802.3ba standard
- QSFP Form factor, 2-wire I2C communication interface and other low-speed electrical interface compliant to SFF 8436 and QSFP Multisource Agreement (MSA)

Cisco QSFP-40G-LR4
The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometers over a standard pair of G.652 single-mode fiber with duplex LC connectors. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

40 GbE QSFP LR4 Fiber Transceiver, LC, 1310nm, SMF

10 GbE SFP+ ER fiber transceiver

1610 nm CWDM 2/4/8-Gbps Fibre Channel SFP+

40GBASE-LR4 transceiver module, 1310 nm, SMF

40GBASE-LR4, 1310 nm, SMF with OTU3 data-rate support, LC, 10km

Cisco

Cisco

Cisco

Cisco

Cisco