Cisco MA-CBL-120G-3M InfiniBand/fibre optic cable Black

QSFP-4SFP10G-CU2M=

QSFP-H40G-CU5M=

SFP-25G-AOC3M=

JNP-40G-AOC-3M

JNP-40G-AOC-7M

The 40-Gigabit QSFP+ transceiver module is a hot-swappable, parallel fiber-optical module with four independent optical transmit and receive channels. These channels can terminate in another 40-Gigabit QSFP+ transceiver, or the channels can be broken out to four separate 10-Gigabit SFP+ transceivers. The QSFP+ transceiver module connects the electrical circuitry of the system with either a copper or an optical external network.The transceiver is used primarily in short reach applications in switches, routers, and data center equipment where it provides higher density than SFP+ modules.

The 40-Gigabit QSFP+ transceiver module is a hot-swappable, parallel fiber-optical module with four independent optical transmit and receive channels. These channels can terminate in another 40-Gigabit QSFP+ transceiver, or the channels can be broken out to four separate 10-Gigabit SFP+ transceivers. The QSFP+ transceiver module connects the electrical circuitry of the system with either a copper or an optical external network. The transceiver is used primarily in short reach applications in switches, routers, and data center equipment where it provides higher density than SFP+ modules.

Product overview

The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor.

Cisco SFP-25G copper cables

Cisco SFP28 to SFP28 copper direct-attach 25GBASE-CR1 cables are suitable for very short links and offer a highly cost-effective way to establish a 25-Gigabit link between SFP28 ports of Cisco switches within racks and across adjacent racks. Cisco offers passive copper cables in lengths of x= 1, 1.5, 2, 2.5, 3, 4 and 5 meters.

1m, 1.5m, and 2m cables do not require FEC on the host ports; 2.5m and 3m cables require BASE-R FEC (also know as FC-FEC) on the host ports; 4m and 5m cables require RS-FEC on the host ports.

Cisco SFP-25G active optical cables

Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. Cisco offers Active Optical Cables in lengths of 1, 2, 3, 4, 5, 7, and 10 meters.

AOC cable require BASE-R FEC on the host ports.

Cisco SFP-25G-SR-S
The Cisco 25GBASE-SR Module supports a link length of 70/100m on OM3/4 MMF.
This module requires RS-FEC on the host ports.

Cisco SFP-10/25G-CSR-S

The Cisco 10/25GBASE-CSR Module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G*.

This module requires RS-FEC on the host port for full reach operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G*. For 10G operation FEC is not required.

Cisco SFP-10/25G-LR-S

The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G.

This module requires RS-FEC on the host ports for operation at 25G.

Juniper Networks devices support a variety of fixed and pluggable transceivers and network cable, including multimode and single-mode fiber-optic cable. We strongly recommend that only transceivers qualified for Juniper Networks be used on Juniper Networks devices. Different transceiver types (long-range, short-range, copper, and others) can be used together on multiport interface modules as long as they are qualified by Juniper Networks. We cannot guarantee that the interface module will operate correctly if third-party transceivers are used.

Juniper Networks devices support a variety of fixed and pluggable transceivers and network cable, including multimode and single-mode fiber-optic cable. We strongly recommend that only transceivers qualified for Juniper Networks be used on Juniper Networks devices. Different transceiver types (long-range, short-range, copper, and others) can be used together on multiport interface modules as long as they are qualified by Juniper Networks. We cannot guarantee that the interface module will operate correctly if third-party transceivers are used.

QSFP+ to 4xSFP+ passive copper cable, 2m

40GBASE-CR4 QSFP+ passive direct-attach copper transceiver module assembly, 5 meter

25GBASE-AOC, Active Optical Cable, 3m

3m 40G QSFP to QSFP Active Optical Cables

7m 40G QSFP to QSFP Active Optical Cables

Cisco

Cisco

Cisco

JUNIPER

JUNIPER