Cisco Meraki MA-SFP-10GB-LR network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

AXM761P10-10000S

MA-QSFP-40G-CSR4

MA-QSFP-40G-SR4

SFP-10G-BXU-I=

SFP-10G-BXD-I=

- Adds 10Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces
- Fits into the two built-in 10GE SFP+ interfaces of GSM72xxPS / GSM73xxS
- Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743
- Fits into standard 10Gigabit SFP+ interfaces
- LC connector
- Drives 10Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables
- Drives 10Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables
- Provides hot-swappable installation or removal
- 10GBaseSR fiber technology is the same for XFP and SFP+ : one Switch equipped with XFP 10GBase-SR LC connectivity can uplink to another Switch equipped with SFP+ 10GBase-SR LC connectivity using the same fiber

Compatible with Cisco Meraki MS 355 Series/MS 425 Series

Compatible with Cisco Meraki MS 355 Series/MS 425 Series

The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.

The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.

ProSafe 10GBASE-SR SFP+, 10pk

40 GbE QSFP CSR4 Fiber Transceiver, MPO12, 850nm, MMF

40 GbE QSFP SR4 Fiber Transceiver, MPO12, 850nm, MMF

10GBASE-BX10-U SFP+ bidirectional transceiver module for 10km, tx1270nm/rx1330nm

10GBASE-BX10-D SFP+ bidirectional transceiver module for 10km, tx1330nm/rx1270nm

NETGEAR

Cisco

Cisco

Cisco

Cisco