Cisco SFP-H25G-CU3M InfiniBand/fibre optic cable 3 m SFP28 Black

SFP-10G-AOC1M=

CAB-SPWR-150CM=

DEM-CB300S

AXC763-10000S

SFP-10G-AOC3M=

The Cisco 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.

The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch.

The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.

10G Passive SFP+ Twinaxial Direct Attach Cable supports speeds of up to 10Gbps, while having lower latency and power consumption than other cables types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. This makes it an optimal solution for handling high bandwidth transmission within short distances. Suitable for interconnecting devices with 10G SFP+ ports. Available in 1m, 3m, 7m lengths.

- Direct Attach SFP+ copper cable (10GSFP+Cu)
- SFP+ connector on both sides
- Drives 10 Gigabit Ethernet (3 m distance)
- 5-year Warranty

Crossover and straight-through cables are used in order to connect switch ports or interfaces to network devices. Consult this table in order to see when to use each of these cable types. Find the device in the left-hand column and match it up with another device in the top row. The intersection of these two devices gives you the cable type used to connect them together.

SFP+ Active Optical Cable assembly, Blue bail latch, 1m

150cm StackPower cable, Spare

300 cm, 10GbE Direct Attach SFP+ Cable

Direct Attach SFP+ copper cable, 3m, 10 Gigabit SFP+

10GBASE-AOC SFP+ Cable 3 Meter

Cisco

Cisco

D-LINK

NETGEAR

Cisco