|
Description
|
FOR AN IMMACULATE BUILD THAT KEEPS ITS COOL
The CORSAIR 5000D AIRFLOW is a mid-tower ATX case with easy cable management for a clean build, with room for a 360mm push pull radiator, a high-airflow front panel, and two included CORSAIR AirGuide fans for concentrated airflow.
CLEAN AND COOL
An optimized steel front panel delivers massive airflow to your system for maximum cooling.
MAXIMUM COOLING POTENTIAL
A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front or side and a 360mm push/pull in the roof.
THERE'S NO REPLACEMENT FOR DISPLACEMENT
The 5000D AIRFLOW isn’t your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion capability for liquid cooling.
POWERFUL DIRECTED AIRFLOW
Equipped with two CORSAIR AirGuide 120mm fans featuring anti-vortex vanes to concentrate airflow and enhance cooling.
TAKE COMMAND OF YOUR COOLING
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.
VERTICAL GPU MOUNT READY
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.
|
The CORSAIR iCUE 5000X RGB is a mid-tower ATX case that shows off your PC, and not its cables. Four stunning tempered glass panels and three included CORSAIR SP RGB ELITE fans put your PC on display.
5000X RGB
MID-TOWER ATX CASE
FOR A CRYSTAL-CLEAR BUILD THAT KEEPS ITS COOL
The 5000X RGB makes a stunning, showpiece-worthy PC easy to build and easier to keep cool with the space and flexibility to mount multiple 360mm radiators, all surrounded by beautiful tempered glass on four sides.
Clear, Clean, and Cool
Four tempered glass panels show off your showpiece-worthy PC, while generous dust-filtered air channels provide minimal obstruction and ample airflow.
Maximum cooling potential
The 5000X RGB has incredible flexibility when it comes to cooling. With up to ten 120mm fan mounts, three included SP RGB ELITE fans with CORSAIR AirGuide technology and three seperate 360mm radiator locations, the only limit to your cooling options is your imagination.
There's no replacement for displacement
The 5000X RGB isn't your run-of-the-mill, standard mid-tower ATX case. Its brilliantly engineered interior offers incredible expansion potential for liquid cooling.
Powerful directed Airflow
Equipped with three CORSAIR SP RGB ELITE 120mm fans featuring AirGuide technology with anti-vortex vanes to concentrate airflow and enhance cooling.
Take command of your cooling
A PWM fan repeater controls the included fans, with connections for up to six in total. Reduce fan speed when you want to keep your system quiet, or increase when you want to push its performance, all from a single 4-pin PWM header on your motherboard.
Extreme Cooling
Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with multiple radiators including up to a 360mm in front and a 360mm push/pull in the roof.
Smart rgb lighting out-of-the-box
Fully control and synchronize the RGB lighting for up to six fans with the included iCUE Lighting Node CORE and CORSAIR iCUE software.
Modern Front Panel I/O
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
vertical gpu mount ready
With included vertical PCIe slots and a screw mount for a CORSAIR PCI-Express 3.0 extension cable (sold separately), you can show off your GPU and keep it secure at the same time.
|
BE AHEAD, POP YOUR STYLE
The MPG series brings out fashionable products by showing extremely unique styles and expressing a conceited attitude towards the challenge of the gaming world. With extraordinary performance and style, the MPG series defines the future of gaming fashion.
DESIGN STORY
Many PC cases have already been introduced to MSI’s GUNGNIR product series. The GUNGNIR product series consists of many products, each with different looks and selling points. After introducing the GUNGNIR series to the market for so long, we are proud to present the latest member of our popular product series, the MPG GUNGNIR 300 series, designed to meet the evolving needs of our customers in this ever-changing world.
HEAT DISSIPATION
You don't need to worry about system cooling with the help of the gaming cases.
OMNIDIRECTIONAL GRAPHICS CARD STAND
The graphics card stand can be easily adjusted for different graphics card sizes and installation methods without the need for any tools, making it a diy-friendly design that allows for changing the optimal support position effortlessly.
HARDWARE COMPATIBILITY
The gaming cases offers extensive support for the installation of your hardware components.
EASY TO INSTALL
The gaming case has many features that make the installation process all the easier.
FANCY APPEARANCE
Build and display the coolest PC with controllable ARGB lighting.
|
Zalman Z-MACHINE 500, Mid-Tower, Tempered Glass, Drive Bays: 1x3.5",1x2.5/ 2x2.5", Expansion Slot: 7, Motherboard Support: ATX/mATX/Mini-ITX, Pre-Installed Fan: 5x120mm, ARGB, Black, 1 Year Warranty
|
Modularity has a new face, and it comes to us in the form of DeepCool's internally reconfigurable ATX+ chassis: the MORPHEUS. With incomparable compatibility and a spacious layout, the MORPHEUS is the best option for the DIY modder or the casual PC enthusiast.
MORPHEUS
The Internal Shapeshifter
MORPHEUS
Modularity has a new face, and it comes to us in the form of DeepCool's internally reconfigurable ATX+ chassis: the MORPHEUS. With incomparable compatibility and a spacious layout, the MORPHEUS is the best option for the DIY modder or the casual PC enthusiast.
A NEW TAKE ON MODULARITY
If sticking to the same system layout for years sounds boring, the MORPHEUS is exactly what you are looking for. Easily switch between the classic single chamber configuration and the dual chamber layout with a simple switch of a few parts. Everything necessary to shift between the two configurations is included, as well as a vertical GPU mount (complete with a Gen 4.0 riser cable).
AIRFLOW AT ANOTHER LEVEL
High airflow panels surround the MORPHEUS case from the front, right, top, bottom, rear, and even the top of the PSU shroud; there will be no shortage of airflow provided to the high-powered heat-generating components inside. High-flow mesh filters are included for the front, top, and bottom panels and will keep dust out.
EXTENSIVE COOLING CAPABILITY
Fan options are unparalleled, with the ability to mount thirteen 120mm or 140mm fans or go to the extreme and add up to six 200mm fans into the conversation. The highly modular fan rails make these configurations a reality.
The MORPHEUS can also support up to three 420mm radiators simultaneously. 420mm radiators can be mounted to the front, top, bottom, and side of the motherboard tray.
A TRINITY OF FANS!
A set of highly convenient trinity fans come mounted inside the MORPHEUS: three beautifully bright 140mm ARGB fans are united into a single 420mm unit. The trinity of fans only require the wiring of a single set of PWM and ARGB cables, greatly reducing the amount of cable management.
MAXIMUM COMPATIBILITY
The ATX+ form factor of the MORPHEUS case guarantees compatibility with a large range of components. This ATX+ DeepCool case supports E-ATX motherboards while also having compatibility for GPUs up to 480mm in length, 195mm tall CPU coolers in the single chamber configuration, and multiple 420mm radiators.
DUAL REAL-TIME DIGITAL DISPLAY
Save precious space on your desktop by moving the monitoring of temperatures and usage of your CPU and GPU onto the built-in display that is included with the MORPHEUS case. A simple-to-install app and an open USB 2.0 header will get the dual display up and running.
A BEVY OF I/O PORTS
With four USB 3.0 ports, a Type-C port, and a hybrid audio port, there is no shortage of devices that can be accessed from the top front I/O panel. There is also an LED cycle button to control the built-in ARGB controller, an HDD activity LED, and a Power button to round out the front I/O.
BITS!
Add a bit of a personal touch with the fun rubber square bits! Included as a fun addition, the pixels can be used with majority of the mesh panels of the MORPHEUS case. Leave messages for others, add custom logos, or create your own 8-bit character!
|
Renowned Z10
+ Big Screen Monitor
Case + Display
Angle-Adjustable Display Panel
15.6-Inch Full HD Display & Monitor Stand Included
Optimal Air Flow with Clean, Modern Front Bezel Design
A front bezel is provided when the display is being used as a standalone monitor
Premium Tempered Glass
4mm-Thick Tempered Glass with Hand-Screws for Easy On-and-Off
Functional I/O Port
ⓐ Power
ⓑ Reset
ⓒ HDD / Power LED
ⓓ Headphone Jack
ⓔ Microphone Jack
ⓕ USB 3.0 ⓖ USB 3.1 Type-C
ⓗ LED Button
Multiple Holes and Spaces for Easy Cable Management
22mm Space for Cable Management
Vertical GPU & GPU Support Bracket
Vertical GPU Bracket Included (Left)
GPU Support Included (Right)
Excellent Expandability and Convenience
- CPU Cooler Maximum Height : 173mm
- VGA Card Maximum Length : 395mm
- PSU Maximum Length : 200mm
- Drive Bay : HDD x 2 / SSD x 4
Motherboard Support
ATX / mATX / Mini-ITX
GPU Support Bracket Included with Height Adjustment
Slides up & down to position GPU Precisely
Pre-installed Fan x 3
Front : 2 x 120mm (Non LED)
Rear : 1 x 120mm(ARGB)
Radiator Support
- Front : 120mm / 140mm / 240mm / 280mm / 360mm
- Top : 120mm / 140mm / 240mm / 280mm / 360mm
- Rear : 120mm
Supports up to Max 11 Fans
Fan Support
- Front : 3 x 120mm / 3 x 140mm
- Top : 3 x 120mm / 2 x 140mm
- Rear : 1 x 120mm
- Bottom : 2 x 120mm
- Side : 2 x 120mm
Pre-Installed
- Front : 2 x 120mm
- Rear : 1 x 120mm (ARGB)
|
|
Short Description
|
Tempered Glass Mid-Tower, ATX, USB 3.0, White
|
Mid-Tower, 2 x 3.5", 4 x 2.5", 2 x USB 3.0, USB 3.1 Type-C, White
|
Mid-Tower, 6 x 2.5, ATX, 505 x 235 x 510 mm, 10.9 kg
|
Open frame Case ATX Mid Tower, 2mm of Full anodized Aluminum chassis, 5mm of Curved Tempered Glass on front, top and flat glass on left & right side, 4 x 120mm RGB fans included - 1 x 3.5" & 1 x .2.5" or 2 x 2.5", Z-SYNC included
|
ATX+, Mini-ITX/Micro-ATX/ATX/E-ATX, 3.5"/2.5", 9 Slots, 1× 420 mm ARGB, USB3.0, 3.5 mm, 528 × 250 × 551 mm, 15.5 Kg, Black
|
Display (15.6", 16:9, FullHD, 30ms, 60Hz) + Case (Mid-Tower, ATX / micro-ATX / mini-ITX, 1x 120mm (Rear), 2x 120mm (Front), ARGB, 9.5kg, Black)
|
+61 490 518 664
