CyberPower MBP20HVAU3 power distribution unit (PDU) 7 AC outlet(s) 1U Black

PSMBS2K

AP9565

AP9568

PSMBS3K

AP6003A

No downtime. Routine maintenance can be performed at any hour A PDU (Power Distribution Unit) with 7 outlets for distribution to your load Rackmount – MBS can be mounted both horizontally or vertically (ORU) into a rack Wallmount option, vertically or horizontally UPS Mountable. Designed to attach to PowerShield Centurion RT and Commander RT ranges. Suitable for all UPS topologies including offline, line interactive and true online double conversion

Reliable rack power distribution designed to increase manageability and efficiency in the data center The output and input connections are (12)C13 Real-time remote monitoring of connected loads User-defined alarms warn IT and data center managers of potential circuit overloads to prevent accidental power loss to critical equipment.

Description - APC Basic Rack PDU, Input : 208, 230V , Input Connection Type : IEC-320 C14 , Cord Length : 6.5 feet ( 1.98 meters ) , Output : 208, 230V , Output Connections : (15)IEC 320 C13

Features - Low Cost Power Distribution, Toolless Mounting Capabilities, Vertical Mounting Capabilities

Includes - Installation Guide, Rack Mounting Brackets, Toolless Mounting Kit

Output:

Output Voltage(s) (main only) - 208, 230 V

Maximum Total Current Draw per Phase - 10 A

Output Connections - (15)IEC 320 C13

Input:

Nominal input voltage - 208, 230

Input frequency (Hz) - 50/60 Hz

Input Connection Type - IEC-320 C14

Cord Length - 6.5 feet ( 1.98 meters )

Acceptable Input Voltage - 200-240 VAC

Maximum Input Current per phase - 10.0 A

Load Capacity - 2300

PowerShield offers a versatile range of MBS solutions (Maintenance Bypass Switch) and PDUs (Power Distribution Units) for all types of UPS applications. A correctly designed MBS enables a technician to perform maintenance on a UPS at any time, without interruption to normal business operations with no need to shut down your critical electrical load. While in the “Bypass” position the UPS will still receive power from the mains (or alternative power source) so that the technician can perform maintenance procedures, without interruption to the load. In the “Bypass and Isolate” position there is no voltage present at the input and output terminals of the UPS. Hence in this position, a trained technician can safely work on components within the UPS. Also, if need be the UPS can be safely removed and replaced, without danger to the technician and without interruption to the load.

APC RACK PDU, BASIC, HALF HEIGHT, 100-240V/20A, 220-240V/16A, (14) C13

Colour Black
Product or component type PDU
PDU type Basic
Provided equipment- Installation guide, Safety guide
Input Voltage 230 V
Height 52.3 cm
Width 5.6 cm
Output Voltage 100 V, 120 V, 200 V, 208 V, 230 V, 240 V
Permissible voltage 100…240 V
Max line current 20 A
Input current limits 20 A
Load capacity 3300 VA
Network frequency 50/60 Hz
Outlet type and quantity 14 IEC 60320 C13
Product certifications- cUL listed, UL listed
Ambient air temperature for operation 0…50 °C
Relative humidity 5…95 %
Operating altitude 0...10000 ft
Ambient air temperature for storage -15…65 °C
Storage Relative Humidity 5…95 %
Storage altitude 0.0000000000…15240.0000000000 m
Compatible Racks- AR3003, AR3006, AR3103, AR3105, ER6202, ER8222

1 - 2 KVA, 7 sockets 10A IEC 320 C13, 2 IEC 10A cable, 80 x 440 x 50 mm

NetShelter Basic Rack PDU, 1U, 1PH, 3.7kW 230V 16A or 3.3kW 208V 16A, x12 C13 outlets, C20 cord

Rack PDU,Basic,Zero U,10A,230V, (15)C13

3KVA, 16A IEC 320 C20, 15Amp Australian Plug to IEC 320 C19, 6x 10A IEC 320 C13, 16A IEC 320 C19, 80 x 440 x 50 mm

APC Rack PDU, Basic, 0U/2U, 16A, 230V, (14x) C13

PowerShield

APC

APC

PowerShield

APC