|
Description
|
CC360 ARGB
The DeepCool CC360 ARGB Micro-ATX case offers outstanding value with spacious component compatibility, a crystal-clear tempered glass window, and a total of three pre-installed ARGB fans that get any build started right.
CC360 ARGB
Micro-ATX Case
ABUNDANT AIRFLOW PERFORMANCE
Well ventilated throughout the entire chassis, the CC360 ARGB comes equipped with an airflow front panel and a large mesh top panel to ensure fresh air is circulating.
PRIMED AND READY
A total of 3 pre-installed ARGB fans delivers big airflow performance ensuring any system build is receiving top-notch cooling capacity.
WIDE COOLING SUPPORT
Enough space to support high-performance AIO liquid coolers with room for a 360mm radiator in front or a 240mm radiator on top. Cooling fan support for up to 6x 120mm or 4x 140mm.
COMPATIBILITY
- CPU Cooler Height (max): 165mm
- GPU Length (max): 320mm
- PSU Length (max): 160mm
STORAGE SOLUTIONS
Install up to 2x 2.5” SSDs directly on the backplate and 2x 3.5” HDDs underneath the shroud in a removeable drive cage for adjustability.
CRYSTAL CLEAR TEMPERED GLASS WINDOW
Showcase your system build with a clean and clear full-sized window.
TOP PANEL MAGNETIC DUST FILTER
Keeps the dust out but ensures exhaust air flows out seamlessly
FRONT I/O PANEL
Features USB 3.0, USB 2.0, and a combo audio jack.
|
Built with durable SGCC steel, the VSK4000E-U3, VSK4000B-U3 & VSK4500E-P-U3 are tough cases meant to last for several builds without fail. The VSK4000-U3 series also meets Thermally Advantaged Chassis (TAC) 2.0 guidelines and is upgraded with two USB 3.0 ports, nine drive bays, and seven expansion slots.
Building a system starts with buying a case, then comes the parts that goes into it, which the cost can add up very quickly. The VSK4000-U3 series is here to provide the basic platform to start building your very own system. It’s humble design and practical functionality contains the fundamentals for a performance chassis. The VSK line is designed to be a stepping stone for those who want to upgrade their system later on. Each chassis devotedly serves their purpose as a cost-effective, unforgettable part of your system building experience.
|
DP301M is the micro-ATX version of another Antec new gaming series - Dark Phantom. As the Dapper Dark Phantom, DP301M still keeps excellent quality and the capability of being equipped with high-performance components. It may be small and light, but we never neglect every detail of the case. The ARGB boomerang front panel design represents the agility and speed in the gaming realm. DP301M is the perfect choice for gamers to enter the gaming world.
|
Thermaltake H200 TG RGB ATX Mid Tower Chassis is designed with the concept of clean, simple, and sleek look which can fulfill basic but important needs from PC builders.
Thermaltake H200 TG RGB ATX Mid Tower Chassis
The H200 TG RGB is designed for PC builders who want a clean and sleek look but crave for good cooling performance and tempered glass at the same time. The H200 TG RGB is a standard mid-tower chassis with motherboard support up to ATX. It comes with one preinstalled standard 120mm fan, and an RGB button that can switch between 19 lighting modes. Brining you an exteriorly simple look and internally sophisticated design.
Classic Design with RGB Light Bar Front Panel
With an unique RGB light bar, the front panel of H200 TG RGB presents a smooth and elegant style.
Built-in PSU Cover
Comes with a full-length PSU cover with a ventilated design to enhance the airflow and hide those unsightly cables.
Tempered Glass Window
The tempered-glass hinge door is designed with a smart lock security system which secures the inner components of your case. H200 TG RGB is built to be more durable, scratch resistant and, of course, easy-to-use.
Superior Hardware Support
The H200 TG RGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual VGA expansion slot of up to 320mm in length, and a power supply with length of up to 160mm (with 3.5” HDD Drive installed) and up to 220mm otherwise.
Excellent Cooling Capability
Optimized for excellent cooling capability with one 120mm fan preinstalled. The case is able to house up to dual 140mm or three 120mm front fans, up to 2x 140mm fans on top, and a radiator size up to 240mm on top to allow users to build a desired high-end system.
Handy I/O Ports
Two 3.0 USB ports on top of the front panel grants direct access when needed. A specially designed RGB control button provides users 19 different light effect selections.
|
MATREXX 55 MESH ADD-RGB 4F
Matrexx 55 Mesh ADD-RGB 4F is a high airflow case that comes with included A-RGB lighting system and full size temepered glass.
4mm Thick Tempered Glass
Full sized 4mm thick, tempered glass side panel gives the case a unique look to perfectly show off your inner structure.
Massive Cooling Compatibility
Optimized airflow is guaranteed with large air intakes on both sides of the front panel and an air exhaust in the back and on top, to keep your components cool.
ADD-RGB Lighting System Included
4 ADD-RGB fans are included in the system, as well as 2 control approaches.
Case button control：
connect fans to case control module, and power up with PSU SATA cable, then control with RGB button.
Motherboard control：
connect fans to motherboard header and use software to control. ( Please note: When using motherboard control, disconnect PSU SATA cable. )
Cooling Compatibility:
Supports the installation of liquid cooler:
- 1 120/140/240/280mm radiator liquid cooling system on the top
- 2 120mm radiator liquid cooling system at the rear
- 3 120/140/240/280/360mm radiator liquid cooling system at the front
Supports the installation of cooling fans:
- 1 2×120/ 2×140mm fan on the top
- 2 1×120mm fan at the rear
- 3 3×120mm/3×140mm fan at the front
PSU Shroud Added
The Matrexx 55 Mesh version is equipped with a PSU Shroud to hide the cables and to keep the system neat and tidy.
Easy Cable Management
Cable managing is now easy with a 210mm wide tower compartment (23mm clearance).
|
A core case taking less space
The MasterBox NR200 takes all of the features found in a core performance ATX chassis and efficiently utilizes them in a space less than half the volume. Every feature is thoughtfully laid out in the 18-liter case to maximize component compatibility, ease of use, and thermal efficiency.
Open ventilation and multiple fan mounts bring airflow where it’s needed, while generous watercooling and aircooling clearances allow the fitment of coolers that can take advantage of all the airflow. Ample clearance for long, triple-slot graphics cards means no sacrifices are needed in GPU power to take advantage of small form factor sizing. The frame is wrapped in a sleek and tasteful steel chassis that blends in perfectly on top of desk.
Unrestricted Cooling Potential
The NR200 can house up to 7 fans in total for every cooling configuration imaginable. Five panels are flanked with ventilation for unrestricted airflow. One 92mm and one 120mm Sickleflow fan are included. The compact structure can efficiently house CPU coolers up to 155mm in height and radiators up to 280mm in length, so even the hottest running hardware can’t be held back.
Triple-slot GPU support
Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm allowing the fitment of high-end graphics cards. The rear ventilation contains PCI slots to allow for vertical GPU mounting to better showcase the graphics card (PCI riser cable sold separately)
Easy, Tool-free access
All external panels and top mounted fans are secured with pins for easy removal, facilitating quick access to the internals without the use of tools.
360 Degree Accessibility
Every panel and frame part of the NR200 frame can be dismantled. Screws are used to secure the frame parts to allow advanced disassembly and multiple angles to easily work inside of the chassis.
High quality materials
Thick, powder coated SGCC steel keeps the fit and finish of the chassis clean and durable even with harsh traveling conditions.
Out-of-the-box Custom Cooling Support
Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful custom water-cooled builds inside a compact enclosure.
Multiple motherboard support options
Compatible with Mini-ITX and Mini DTX. The PSU can be front mounted for extra motherboard clearance with a maximum size of 244 x 226 mm.
Looking to show off more?
- Added tempered glass panel
- Custom length riser cable
- 2x 120mm SickleFlow fans instead of 1x 92mm + 1x 120mm fan
Customization
3D printable feet
During the design phase we had created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our users?" The team unanimously agreed with this direction.
As a result, end users can 3D print a selection of different shapes and sizes, and even choose the color based on the filament they print with.
|
|
Short Description
|
Mini-ITX / Micro-ATX, ATX PS2, 418 x 215 x 431 mm, 4.9 kg
|
VSK 4000E-U3 - Standard ATX, microATX, Mini-ITX, 2x USB 3.0, 500W
|
DP301M Compact Micro-ATX Gaming Case
|
Middle tower, 4mm Tempered Glass, SPCC, USB 3.0 x 2, HD Audio x 1, RGB Button x 1
|
Mid-Tower, 2 x 3.5", 4 x 2.5", Mini-ITX/Micro-ATX/ATX/E-ATX, 2 x USB 2.0, 1 x USB 3,0, 1 x Audio, 1 x Mic, RGB LED, 435 x 210 x 478 mm, 7.08 Kg, Black
|
Mini ITX, 2x USB 3.2 Gen 1 Type-A, 1 x 3.5mm, 1 x 120mm 650-1800RPM PWM, 1 x 92mm 650-2300RPM PWM, 4.6 kg, Black
|
+61 490 518 664
