HPE Aruba Networking 100G QSFP28 MPO SR4 100m 12-fiber MPO OM3 MMF Transceiver

AXM761P10-10000S

MA-QSFP-100G-SR4

SFP-10/25G-LR-S=

EX-SFP-10GE-LR

JNP-QSFP-40G-LR4

- Adds 10Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces
- Fits into the two built-in 10GE SFP+ interfaces of GSM72xxPS / GSM73xxS
- Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743
- Fits into standard 10Gigabit SFP+ interfaces
- LC connector
- Drives 10Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables
- Drives 10Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables
- Provides hot-swappable installation or removal
- 10GBaseSR fiber technology is the same for XFP and SFP+ : one Switch equipped with XFP 10GBase-SR LC connectivity can uplink to another Switch equipped with SFP+ 10GBase-SR LC connectivity using the same fiber

MA-QSFP-100G-SR4 | 100GB Multi-Mode 100m (100GBASE-SR4)

CISCO - 10/25GBASE-LR SFP28 Module

Juniper EX-SFP-10GE-LR. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Compatible products: EX2500

Juniper Networks devices support a variety of fixed and pluggable transceivers and network cable, including multimode and single-mode fiber-optic cable. We strongly recommend that only transceivers qualified for Juniper Networks be used on Juniper Networks devices. Different transceiver types (long-range, short-range, copper, and others) can be used together on multiport interface modules as long as they are qualified by Juniper Networks. We cannot guarantee that the interface module will operate correctly if third-party transceivers are used.

ProSafe 10GBASE-SR SFP+, 10pk

Meraki SR4 QSFP 100G Transceiver

10/25GBASE-LR SFP28 Module for SMF

Juniper EX-SFP-10GE-LR, Fiber optic, 10000 Mbit/s, SFP+, LC, 10000 m, 1310 nm

QSFP+ 40GBASE-LR4 transceiver module, 1310 nm for up to 10 km on SMF

NETGEAR

Cisco

Cisco

JUNIPER

JUNIPER