HPE Aruba Networking Networking Instant On 12V/18W Power Adaptor RW

ETH-SP-G2

WG9004

WG9009

JW055A

R3J19A

ESD Protection for Outdoor High-Speed Networks

Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.

The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment
compatibility.

Ideal for WISP Networks
All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential.

For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building.
Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely
discharged into the ground.

WatchGuard Dual-Band Omni Antennas (5/7 dBi) AP430CR/AP327X

An optional AC power adapter supplies 12V DC power to the device.

ARUBA AP-270-MNT-H2 270 SERIES MT KIT

.

Ethernet Surge Protector Gen 2, Surge Voltage from 100V/s to 1kV/µs, IEEE 802.3af PoE Support

Dual-Band Omni Antennas (5/7 dBi)

Power Supply for AP225W/AP130/AP330/AP432, 100-240V, 50-60Hz, DC 12V, 2.5A, 69 mm x 32.6 mm x 49.5 mm

AP-270-MNT-H2 AP-270 series access flush wall or ceiling mount

Aruba Networking AP-MNT-E Campus AP Type E Wall-Box Mount Bracket Kit

Ubiquiti

WatchGuard

WatchGuard

HPE

HPE