MBeat MB-XAD-U3MCF interface cards/adapter USB Type-C

U30AS25

USBMBADAPT2

VL-UA01

SA225

CM461

The U30AS25 USB 3.0 to SATA adapter cable allows to connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB port providing the easiest way to upgrade the hard drive in your laptop by adding an external SSD via USB 3.0. U3 AS25 supports UASP allowing for transfer speeds up to 7 % faster than conventional USB 3.0 which enables you to utilize the full potential of your SATA III SSD/HDD when paired with a UASP-enabled host controller.This adapter has a compact design with no requirement for an external power source for easy storage and on the go use. Plus the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosures making it perfect for applications such as data migration drive cloning and data backup applications.

This USB A to USB Motherboard 4-Pin Header plugs directly into a motherboard USB header, providing two standard USB A female ports.
A cost-effective solution for any application requiring internal USB 2.0 female ports, including using a bootable USB flash drive as a SSD or collecting data in embedded applications.
The StarTech.com Advantage
- Converts a motherboard USB connector into two USB A Female ports
- Easy to use and install
- Backed by StarTech.com's lifetime warranty

The Volans aluminium USB Audio Adapter (UA01) adds a stereo output and mic input to any PC/Console and converts a standard headset into a USB headset. Because it uses a USB digital connection, the USB sound isolates the audio signal from the noisy electronics inside a PC or laptop to provide higher-quality sound.

SA225 is a 2 in 1 Combo Adapter for both M.2 and mSATA SSD to USB 3.0 interface. With this adapter, you can easily access M.2 or mSATA SSDs via standard USB port on PC, also you can install this adapter to SATA port after detached the USB cable. It’s an ideal solution for data backup and migration.

This adapter converts N64, GameCube, Super NES, SFC consoles composite analog video to digital HDMI for modern HDTV. It up-scale video to 1080p, both video and audio are integrated into the HDMI output, providing all-digital signal to HDTV.

Plug and play, no external power needed, simply plug this adapter into your retro Nintendo console, then connect an HDMI cable from the converter to your HDTV, you can enjoy retro games on your modern HDTV.

Also, video aspect ratio is easily selectable with a switch on the device, you can select 4:3 mode to avoid video being stretched to 16:9 on widescreen HDTV.

ALOGIC USB 3.0 USB-A to SATA Adapter Cable for 2.5" Hard Drive

2 Port USB Motherboard Header Adapter

Aluminium USB Audio Adapter

USB3.0 to mSATA + M.2 (NGFF B Key) 2 In 1 Combo Adapter

Composite AV to HDMI, 60x38x15 mm, 40 g

ALOGIC

StarTech.com

Volans

Simplecom

Simplecom