The wishlist name can't be left blank

Tycon Systems TP-DCDC-1248G PoE adapter Gigabit Ethernet

SKU
TP-DCDC-1248G
$111.13
In stock
Only 4 left
12/24VDC In, 48V Passive Gigabit PoE Inserter
Estimate Fees
  • Input Voltage 9-36VDC; Output 48VDC
  • Integrated Gigabit PoE Inserter
  • High Power 19W
  • Short Circuit, Over Current and Over Voltage Protection
  • High Temperature Operation
  • Removable Wire Terminal Input for up to 12AWG wires
For corporate price, please request for quotation at sales@techfable.com.au
More Information
SKU TP-DCDC-1248G
EAN 0633090399633
Manufacturer Tycon Systems
Availability Y
The TP-DCDC-1248G DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Passive voltage from a 12 or 24V battery system.

They have an integrated Gigabit passive PoE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack.
They work by supplying power on the Ethernet pins 4,5(V+) and 7,8(V-).

They have various protections for surge, short circuit and overload. The units have power output of 19W.
Network
Ethernet interface typeGigabit Ethernet
Technical details
Ethernet interface typeGigabit Ethernet

You may also be interested in

Compare Products
Product Tycon Systems TP-DCDC-1248G PoE adapter Gigabit Ethernet Tycon Systems TP-DCDC-1248G PoE adapte...
$111.13
D-Link 1-Port Gigabit 30W PoE Injector D-Link 1-Port Gigabit 30W PoE Injector
$115.86
Logitech PoE Injector with Plug Set Logitech PoE Injector with Plug Set
$111.34
Ubiquiti Networks UACC-ADAPTER-POE-USBC PoE adapter
New
Ubiquiti Networks UACC-ADAPTER-POE-USB...
$112.20
HPE Aruba Networking AP-POE-ATSR 1-Port Smart Rate 802.3at 30W Midspan Injector
Hot Product
HPE Aruba Networking AP-POE-ATSR 1-Por...
$146.93
Tycon Systems TP-DCDC-1224G PoE adapter 24 V
Bestseller
Tycon Systems TP-DCDC-1224G PoE adapte...
$120.05
SKU
TP-DCDC-1248G
DPE-301GI
952-000074
UACC-ADAPTER-POE-USBC
R6P67A
TP-DCDC-1224G
Description
The TP-DCDC-1248G DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Passive voltage from a 12 or 24V battery system.

They have an integrated Gigabit passive PoE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack.
They work by supplying power on the Ethernet pins 4,5(V+) and 7,8(V-).

They have various protections for surge, short circuit and overload. The units have power output of 19W.
- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
- Lightweight, compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections

D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.

The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.

The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.

Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.

Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.

Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.

PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.
LOGITECH POE INJECTOR WITH PLUG SET - OFF WHITE - OTHER - N/A - WW - POE INJECTOR W/ PLUG
Ubiquiti PoE to USB-C Adapter

SKU: UACC-Adapter-PoE-USBC

Tech Specs: Click Here

Description:Versatile adapter that provides power and connectivity to USB-C devices, including compatible Protect WiFi cameras.

Featres:
•(1) GbE PoE input
•(1) USB-C output
•Transforms the G4 Doorbell Pro* and G4 Instant** into a wired PoE camera
•Provide GbE connectivity*** to USB-C device, such as notebook
*G4 Doorbell Pro PoE to USB-C Cable sold separately.
**G4 Instant PoE to USB-C Cable sold separately.
***Speed depends on USB-C cable max data transfer rate.
.
The TP-DCDC Gigabit Series of DC to DC converters offered by Tycon Power Systems are a low cost and high efficiency solution for those requiring IEEE802.3af and IEEE802.3at or Passive Power over Ethernet from a 12VDC or 24VDC or 48VDC voltage source like a battery system or vehicle. They have an integrated POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.
Short Description
12/24VDC In, 48V Passive Gigabit PoE Inserter
1-Port Gigabit PoE Injector, White
PoE Injector with Plug Set
Ubiquiti Poe Adapter For Protect Wifi Cameras, Suitable For G4 Instant & G4 Doorbell Pro, No Cable
Aruba Networking AP-POE-ATSR 1-Port Smart Rate 802.3at 30W Midspan Injector
9 - 36VDC IN 24VDC Passive OUT, 19W DC to DC Converter with PoE Inserter
Manufacturer
Tycon Systems
D-LINK
LOGITECH
Ubiquiti
HPE
Tycon Systems