|
Description
|
HPE Aruba Networking 610 Series Campus Access Points are designed to take advantage of the 6 GHz band and achieve up to a combined maximum 3.6 Gbps data rate for higher throughput and faster speeds indoors. Adding support for the 6 GHz band increases capacity by up to 1200 MHz with more 80/160 MHz channels to support growing demands due to bandwidth-hungry video, growth in client and IoT devices, and expanded use of the cloud. The compact and cost-effective 610 Series features dual radios that can be tuned to any two of the three spectrum bands for Wi-Fi: 2.4 GHz, 5 GHz, and 6 GHz. Full tri-band coverage is available in a multi-AP deployment. Built-in GPS receivers and fine time measurements enable the 610 Series to automatically locate themselves and serve as reference points for accurate indoor location measurements. The 610 Series includes a limited lifetime warranty.
What is new supporting point:
Low power consumption enables unrestricted operation from an 802.3af (Class 3) PoE source [1].
Offered as optional eco-friendly 10-pack.
Up to seven 160 MHz channels in 6 GHz support low-latency, bandwidth-hungry applications such as high-definition video and augmented reality/virtual reality applications.
Unlock the 6 GHz band to deliver up to 1200 MHz additional capacity and up to 3.6 Gbps combined peak datarate.
Built-in GPS receivers and fine time measurement allow APs to automatically locate themselves and serve as reference points for accurate indoor location measurements.
Software programable, dual-radio operating modes deliver cost-effective coverage across any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, 6 GHz with full tri-band coverage in multi-AP deployments.
|
The Cisco® Aironet® 2700 Series of Wi-Fi access points (APs) delivers industry-leading 802.11ac performance at a price point ideal for plugging capacity and coverage gaps in dense indoor environments. The Aironet 2700 Series extends 802.11ac speed and features to a new generation of smartphones, tablets, and high-performance laptops now shipping with the faster, 802.11ac Wi-Fi radios.
The Aironet 2700 series supports 802.11ac “Wave 1” In its first implementation, providing a theoretical connection rate of up to 1.3 Gbps. That’s roughly triple the rates offered by today’s high-end 802.11n APs. The boost helps you stay ahead of the performance and bandwidth expectations of today’s mobile worker, who usually uses multiple Wi-Fi devices instead of just one. As such, users are adding proportionally larger traffic loads to the wireless LAN, which has outpaced Ethernet as the default enterprise access network.
High Density Experience (HD Experience)
Building on the Cisco Aironet heritage of RF excellence, the 2700 Series APs run on a purpose-built, innovative chipset with a best-in-class RF architecture. This chipset provides a high-density experience for enterprise networks designed for mission-critical, high-performance applications. The 2700 is a component of a Cisco series of flagship, 802.11ac-enabled APs that delivers a robust mobility experience based on the following product features:
- 802.11ac with 3x4 multiple-input multiple-output (MIMO) technology supporting three spatial streams. This architecture offers a sustained 1.3-Gbps rates over a greater range for more capacity and reliability than competing APs.
- Cross-AP Noise Reduction, a Cisco innovation that enables APs to intelligently collaborate in real time about RF conditions so that users connect with optimized signal quality and performance.
- Optimized AP Roaming to ensure that client devices associate with the AP in their coverage range that offers the fastest data rate available.
- Cisco ClientLink 3.0 technology to improve downlink performance to all mobile devices, including one-, two-, and three-spatial-stream devices on 802.11ac. At the same time, the technology improves battery life on mobile devices.
- Cisco CleanAir technology enhanced with 80MHz channel support. CleanAir delivers proactive, high-speed spectrum intelligence across 20-, 40-, and 80-MHz-wide channels to combat performance problems due to wireless interference.
- MIMO equalization capabilities, which optimize uplink performance and reliability by reducing the impact of signal fade.
The Cisco Aironet 2700 Series sustains higher-speed connections farther from the AP than competing solutions. The result is up to three times greater availability of 1.3-Gbps rates in the Cisco environment for optimum mobile device performance and user experiences.
|
Faster Business with Wave 2 Tri‑Band Wi‑Fi
The Wireless AC2200 Wave 2 Tri‑Band Unified Access Point delivers great bandwidth and flexibility for medium to large Wi‑Fi networks. Its fast Tri‑Band speeds, 2x2 MU‑MIMO, band steering, and Airtime Fairness upgrades your business to the best.
Advanced Wireless Features
802.11k Fast Roaming allows wireless clients to move seamlessly between access points. 802.1p Quality of Service (QoS) provides enhanced throughput and better performance of time‑sensitive traffic like VoIP and streaming DSCP. It also supports Wi‑Fi Multimedia (WMM), so in the event of network congestion, time‑sensitive traffic can be prioritised. Airtime Fairness ensures that equal airtime is given to each client, preventing slower devices from monopolising the wireless connection.
Upgrade to Tri‑Band WiFi
The DWL-7620AP features one 2.4 GHz and two 5 GHz wireless bands for the growing number of devices connecting to a single access point.
Allows older 802.11b/g/n devices to connect to the 2.4 GHz while two 5 GHz bands can be dedicated to newer, faster wireless AC devices to enjoy seamless bandwidth-intensive applications like HD video conferencing, VoIP and file collaboration.
Band steering technology efficiently load balances the clients and traffic between the three wireless bands to ensure your wireless clients have a superior user experience even in high-density environments.
Greater Speed and Connectivity
Combined wireless speeds of up to 2,200 Mbps over 3 wireless bands for improved business network speeds.
Wired link aggregation2 allows two Gigabit Ethernet ports to be linked together and act as a single port doubling the access point’s available bandwidth and maximising the overall throughput.
MU‑MIMO Efficiency
With support for MU-MIMO (Multi-User Multiple Input Multiple Output), the DWL-7620AP simultaneously communicates with multiple clients using multiple antennas. This allows the access point to utilise the spectrum more efficiently and significantly increase the network capacity. The 2 x 2 MU-MIMO takes full advantage of all streams to serve more wireless clients, dramatically improving wireless performance.
Flexible Deployment
It can be ceiling mounted or wall mounted to provide the best wireless coverage. Integrated Power over Ethernet (PoE) makes deployments faster and means it can be installed in areas without power outlets.
Effective Management
D‑Link Unified Wireless Controllers enable centralised management of multiple access points. Used as a standalone wireless access point, self‑configuring cluster or managed centrally via a D‑Link Wireless Controller. The AP includes a Console port for debugging and configuration.
Centrally Managed
When working in conjunction with D-Link Unified Wireless Controllers (DWC-1000, and DWC-2000), multiple units of DWL-7620AP can be centrally managed. This allows for a large number of access points to be deployed and managed easily and efficiently.
Automatic Radio Frequency (RF) Management
When the DWL-7620AP senses a neighbouring AP nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference and allows access points to be deployed more densely.
To further minimise interference, when a nearby AP is on the same channel, the DWL-7620AP will automatically lower its transmission power. If the nearby access point fails, then this access point will increase its transmission power to expand coverage.
Guaranteed round‑the‑cloud tech response, even on weekends & bank holidays
Protect your network uptime with optional rapid-response tech support, designed to ensure businesses get the best fit solution for their unique environment. Our warranties and extended service packages reduce downtime, extend the lives of the products, and maximise your up-time by solving technical problems quickly and effectively.
|
Secure Wi-Fi for Your Business Without Breaking the Bank
The AP325 from WatchGuard is designed for those cost-conscious organizations looking for a modern, 802.11ac Wave 2 access point. Best for medium-density environments such as K-12 schools, small and midsize businesses, distributed office spaces, small footprint retail, small meeting rooms, restaurants, and healthcare offices.
When managed with the Wi-Fi Cloud, you can unlock the full potential of your WatchGuard access points with powerful WIPS security, location-based analytics, and social-enabled captive portals.
Multi-User MIMO
Your Wi-Fi will show no signs of slowing down with MU-MIMO allowing the AP to serve multiple client devices downstream simultaneously. This decreases the time each device must wait for a transmission from the AP and speeds up your network. Considering a typical small to midsize business (SMB) has at least 50+ devices including smartphones, tablets, and laptops, it’s vital to be able to utilize as much of the Wi-Fi frequency spectrum as efficiently as possible.
Flexible Management Options
WatchGuard offers two management scenarios to meet the needs of SMBs and distributed enterprises. You can manage any of our access points with either a Firebox via the Gateway Wireless Controller with lightweight feature set, or with WatchGuard’s Wi-Fi Cloud. And with the Wi-Fi Cloud you get an expanded set of features including strong WIPS security, social-enabled captive portals, and location-based analytics for optimal business insights. For ultimate peace of mind, rely on a Firebox UTM-protected network with WatchGuard Wi-Fi Cloud-managed APs to realize the full marketing and security potential of a Cloud-managed access point solution.
|
Secure Wi-Fi for Your Business Without Breaking the Bank
The AP325 from WatchGuard is designed for those cost-conscious organizations looking for a modern, 802.11ac Wave 2 access point. Best for medium-density environments such as K-12 schools, small and midsize businesses, distributed office spaces, small footprint retail, small meeting rooms, restaurants, and healthcare offices.
When managed with the Wi-Fi Cloud, you can unlock the full potential of your WatchGuard access points with powerful WIPS security, location-based analytics, and social-enabled captive portals.
Multi-User MIMO
Your Wi-Fi will show no signs of slowing down with MU-MIMO allowing the AP to serve multiple client devices downstream simultaneously. This decreases the time each device must wait for a transmission from the AP and speeds up your network. Considering a typical small to midsize business (SMB) has at least 50+ devices including smartphones, tablets, and laptops, it’s vital to be able to utilize as much of the Wi-Fi frequency spectrum as efficiently as possible.
Flexible Management Options
WatchGuard offers two management scenarios to meet the needs of SMBs and distributed enterprises. You can manage any of our access points with either a Firebox via the Gateway Wireless Controller with lightweight feature set, or with WatchGuard’s Wi-Fi Cloud. And with the Wi-Fi Cloud you get an expanded set of features including strong WIPS security, social-enabled captive portals, and location-based analytics for optimal business insights. For ultimate peace of mind, rely on a Firebox UTM-protected network with WatchGuard Wi-Fi Cloud-managed APs to realize the full marketing and security potential of a Cloud-managed access point solution.
|
The Cisco® Catalyst® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent.
Hyperconnectivity with steady performance in demanding environments. Exponential growth of Internet of Things (IoT) devices and next-generation applications. Advanced persistent security threats. All of these require a wireless network that provides resiliency and superior connectivity, integrated security with advanced classification and containment, and hardware and software innovations to automate, secure, and simplify networks. Updating your wireless infrastructure to one that will meet these needs is paramount for today’s digital business. The new generation of Cisco Catalyst 9100 Access Points, with high-performance Wi-Fi 6 (802.11ax) capabilities and innovations in RF performance, security, and analytics, enables end-to-end digitization and helps accelerate the rollout of business services by delivering beyond Wi-Fi.
The Cisco Catalyst 9115 Series Access Points are enterprise-class products that will address your current and future needs. They are the first step to updating your network to take better example of all of the features and benefits that Wi-Fi 6 provides.
|
|
Short Description
|
Aruba Networking AP-615-RW Dual Radio Tri Band 2x2 Wi-Fi 6E Int Antennas Campus AP
|
Aironet 2700e, 1.3Gbps, 802.11a/b/g/n/ac, 2.4/5GHz, Gigabit Ethernet, 802.3at PoE+
|
DWL-7620AP, AC2200, 2.4/5 GHz, 2x2 MIMO, 2x 10/100/1000BASE‑T LAN, IEEE 802.11b/g/n/ac, 32 SSIDs, PoE, 205x39 mm
|
802.11ac, MU-MIMO, 2 x RJ-45 LAN, PoE+, Qualcomm IPQ4028 717 MHz, 2.4/5GHz, 850 g, 3Y Basic Wi-Fi
|
802.11ac, MU-MIMO, 2 x RJ-45 LAN, PoE+, Qualcomm IPQ4028 717 MHz, 2.4/5GHz, 850 g, Trade Up, 3Y Total Wi-Fi
|
4x4 downlink MU-MIMO, 802.11ac, 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45), USB 2.0
|
+61 490 518 664
